Replace your old shower tray with a made-to-measure one

To replace an old, yellowed or slippery shower tray, the most practical move is to swap it for a resin one cut to the exact size of the gap you already have: it fits with no trimming, brings back the anti-slip and goes in without major building work. The tiling and the drain are already there, so the change is quick and clean, and in a morning the shower looks brand new.

Why make it to measure when replacing

When the gap already exists, the key is nailing the size. An off-the-shelf tray almost never matches the real space and forces you to fill joints or trim the tiling. We make it to measure in Murcia at your exact width and length, so it rests wall to wall. All you need is to take the measurements properly: we walk you through it step by step in how to measure a shower tray. Each tray weighs around 46 kg/m², just enough to sit firm and still be manageable when you lift out the old one.

What you gain from the change

• C3 anti-slip class (UNE-ENV 12633): you win back the grip the old tray had lost. We cover it in class 3 (C3) anti-slip.
• Floor-level or on top of the screed, depending on how your installation sits. If you want to drop to floor level, see installing the tray flush with the floor.
• New trap and grate included as standard, at no extra cost.
• A continuous, easy-to-clean surface, with none of the yellowing or scratches of the old tray.

Choose finish, colour and size

This is the moment to refresh the look of the bathroom. You have the Smooth with its continuous surface, the Elite with a soft texture, or the more decorative Slate, across the whole colours chart. The most common sizes when replacing, such as 70×70 or 70×140, are ready to go, and any other we cut to your figure. We ship from the factory across Spain and the rest of Europe.

Frequently asked questions

Do you have to chip away tiling to change the tray? Usually not. If you keep the existing gap and drain, you just lift out the old tray and set the new one to your size, with a touch-up of the sealant.

Can I take the chance to lose the step? Yes. If the installation allows it, the made-to-measure tray goes in flush with the floor and you end up with a step-free shower.

Configure your new tray to the exact size of the gap and see the price straight away.