Ribera shower tray
Straight lines and a three-sided outer frame, with a single fall towards the waste, which sits at the bottom of the fall. Slate texture, the same as the finish of that name.
What sets the Ribera apart is the cover plate that hides the waste across the width of the tray: order it in resin, in any colour from the chart, or in stainless steel.
You will not see a price here, and that is not an oversight: we do not yet have the factory's tariff for this model. We would rather tell you than show an invented figure. Write to us with your size and we will send it as soon as we have it confirmed.
- We are the manufacturer.No middlemen. Custom cuts and sizes.
- Free trap & grate.Included with every tray, at no extra cost.
- Non-slip C3.Top rating: the tray that won't slip.
- Shipping from Spain across Europe.Made to measure and delivered to your door.
Specifications
- Widths
- 70, 80 and 90 cm
- Lengths
- 90 to 200 cm, in 10 cm steps
- Texture
- slate
- Waste
- rectangular valve, outlet at the bottom of the fall
- Cover plate
- 60-70-80 × 10 cm, in resin or stainless steel
- Cut
- lengthwise, up to 10 cm
- Material
- polyester resin with dolomite mineral filler, 27 to 30 mm, 46 kg/m²
- Colours
- the ten from the RAL chart, like the rest
Description
Which bathroom it suits
The Ribera is the straight-lined tray of the range. Its three-sided outer frame gives a clean finish against the wall and hides the waste inside the frame itself, so the surface stays clear: no grate in the middle and no cross fall.
It works well where the tray sits against three walls and you want it to disappear. If your space is open on more sides, look at the Smooth or the Slate, which are drilled in the centre.
The cover plate, which is its trademark
A rectangular plate of 60, 70 or 80 × 10 cm sits over the waste, depending on the tray width. Order it in resin, in any colour from the chart — so it vanishes against the tray — or in stainless steel if you would rather see it.
The stainless version is made to order at the factory too, so it is worth saying so when you ask for a quote.
Material and safety
The same polyester resin with dolomite mineral filler as the rest: 27 to 30 mm thick, 46 kg/m², colour running through the whole body and class 3 (C3) anti-slip, the top rating, to DIN 51097. The texture is slate, the same as our finish of that name.
FAQ
Why is there no price on the site?
Because the factory has not sent us a tariff for this model yet. We would rather say so than show an invented figure. Write to us with your size and we will send a firm price and lead time.
Can I choose where the waste goes?
No. It sits at the bottom of the fall, in the frame at one end and centred across the width, with a single 2% slope. It is formed at the factory and cannot be moved.
Can it be cut to size?
Yes, lengthwise and up to 10 cm, on the side opposite the waste. The width is not cut: it has to be 70, 80 or 90 cm.
Which colours is it made in?
The ten from the factory's RAL chart, the same as the rest of the range. The colour runs through the whole body.
How does it differ from the Elite?
Both hide the waste in a frame, but the Elite covers it with a 31 × 6.5 cm linear steel grate and the Ribera with a plate spanning the full width of the tray. The Elite also has a price on the site.
The trap it uses
The Ribera has a rectangular waste, not the round one of the Smooth and the Slate. It hides in the frame at one end, at the bottom of the fall, and is covered by the plate spanning the width of the tray. It comes with the tray. The factory has not sent us the exploded drawing of this valve yet, so we do not publish one: the drawing on the Elite page belongs to a different valve.
- Type
- rectangular, in the frame
- Flow rate
- 60 l/min at 15 mm water depth
- Cover
- 60-70-80 × 10 cm, in resin or stainless steel
- Standard
- waste compliant with CE-UNE EN 274
Where the waste sits
It sits at the bottom of the fall, in the frame at one end and centred across the width, with a single 2% slope. The cover plate spans the width of the tray; the outer frame is 5 cm and the outlet is 20 cm from the end. It cannot be moved: the fall is formed at the factory.
Other finishes
Ask for a price with your size
Tell us the model, the width and length you need and your postcode. We will send you a firm price and lead time, delivery included.
info@aquatit.com