Smooth
Smooth matte surface, minimalist and elegant. The only smooth tray with the top non-slip rating: it won't slip.
From €99.95
- We are the manufacturer. No middlemen. Custom cuts and sizes.
- Free trap & grate. Included with every tray, at no extra cost.
- Non-slip C3. Top rating: the tray that won't slip.
- Shipping from Spain across Europe. Made to measure and delivered to your door.
Description
A minimalist design that fits any bathroom. Flat, soft surface, pleasant to the touch.
High-quality resin: durable, moisture-resistant and easy to clean and install.
The Smooth shower tray is the flat, matt-surface version of our mineral-filled resin: the most understated, timeless finish, and the only smooth one that keeps the C3 anti-slip rating, the highest there is. It suits any bathroom, from the strictly minimalist to the classic.
Which bathroom it suits
The Smooth is the all-rounder of the range. Its flat, matt surface, with no pronounced relief, carries the floor through visually and makes small bathrooms look larger. It is the safe choice when you would rather not overthink it: it works with any taps, screen or wall tiling.
Because we make it to your exact size, from 70×70 to 100×200 cm, it fills awkward gaps without messy cuts. If you want more texture and warmth, compare it with the Slate; if you are after a premium touch, take a look at the Elite.
Anti-slip even though it is smooth
People usually assume smooth means slippery. Our Smooth breaks that rule: it carries a treatment that gives it class 3 (C3) under the UNE-ENV 12633 standard, the safest category, including underfoot when the floor is wet. That is why it works in bathrooms used by children or older people without giving up the clean look.
Fitting: flush with the floor or surface-mounted
You can set it flush with the floor for a modern, step-free finish, or surface-mount it for quick refits with barely any building work. The stainless steel trap and grate are included, with the waste centred across the width and the fall already formed at the factory. At around 46 kg/m², it sits firm and stays put.
Upkeep
Its smooth surface is the easiest to clean in the whole range: a cloth and pH-neutral soap are all it takes. Since the colour runs right through the body, small scuffs barely show. Keep metal scourers and abrasive products away from it. We go into detail in how to clean a resin shower tray.
The waste and trap, part by part
The trap comes with the tray and is the same on every size. It fits the hole moulded at the factory and exits sideways with a G 1½" thread, the standard plumbing size, so your fitter connects it without odd adaptors.
Dimensions
- Outlet
- side exit, G 1½" thread
- Outer diameter
- 150.8 mm
- Body diameter
- 106.8 mm
- Overall height
- 58.86 mm
- Clearance under the tray
- 60 mm or more (recommended)
- Flow rate
- 60 l/min at 15 mm water depth
- Materials
- polypropylene · NBR seals · AISI 304 stainless ring and screws
Parts in the assembly
- NBR O-ring (Ø 65 × 2.6 mm)
- Compression ring (PP)
- Waste basket, Spanish version (PP)
- Round main body (PP)
- Basket (PP)
- Seal (NBR)
- Nut (PP)
- Seal (NBR)
- Fixing ring (AISI 304 stainless steel)
- Three M5 × 35 countersunk screws (AISI 304 stainless steel)
- Connection seal (silicone)
The assembly is 58.86 mm tall, so allow 60 mm or more of clear space under the tray to fit it comfortably. That is the measurement to check before you buy, especially for a floor-level installation.
Where the waste sits
It is drilled at the factory and cannot be moved: the fall is already formed towards it, across four panels. On rectangular sizes it is centred across the width and 37.5 cm from one end; on square sizes it sits in the centre of the tray. If your floor outlet does not line up, it is solved during installation with a length of pipe at its own fall.
FAQ
Can I order a size that's not listed?
Yes. We make to measure: message us on WhatsApp with your width and length for a quote.
Can the tray be cut?
Yes, the resin can be cut to fit your bathroom to the millimetre.
Does it include a trap?
Yes, every tray includes the trap and grate for free.
Is it slippery?
No. The whole range has the top non-slip rating (class C3).
Can I choose where the waste goes?
No: it comes pre-drilled at the factory, centred across the width and on rectangular sizes 37.5 cm from one end, and on square sizes in the centre of the tray. The fall is already formed towards it. We cannot put it in a corner or halfway along the tray. If your floor outlet doesn't line up, that gets solved during installation with a run of pipe; what you need to measure is the clear height under the tray. We explain it here
Is the Smooth tray slippery?
No. Despite its flat surface, it carries C3 anti-slip class (the highest), including when the floor is wet.
What colours does it come in?
All five in the range: white, cream, ash, anthracite and black, with the colour running right through the body.
Can it be made to a specific size?
Yes. We make it to your exact size between 70×70 and 100×200 cm, with the price shown instantly on the product page.
How much does it weigh?
Around 46 kg per square metre; an 80×120, for instance, comes to about 44 kg. The larger sizes are easier to fit with two people.
Smooth or Slate?
The Smooth gives a clean, minimalist feel; the Slate brings texture and warmth. Both are C3 anti-slip, so it comes down to style.
Specifications
- Material
- Polyester resin with dolomite mineral filler and gel coat
- Thickness
- 27 to 30 mm
- Weight
- 46 kg/m²
- Non-slip
- Class 3 (C3), the top rating — DIN 51097:1992
- Waste
- Round waste, 60 l/min · 14.3 × 14.3 cm stainless steel grate
- Installation
- Floor-level or over the existing floor
- Colours
- Ten from the factory RAL chart; colour runs through the whole body
