Semicircular shower tray

It is the Quarzo tray — the same one behind our Smooth and Slate finishes — with a curved front at a 50 radius, made for two-panel sliding corner enclosures.

50 radius curveC3 non-slipFor corner enclosures

€99.95VAT included

From €99.95

Finish: Smooth

Colour: White

Width × Length (cm)

We are the manufacturer. No middlemen. Custom cuts and sizes.
Free trap & grate. Included with every tray, at no extra cost.
Non-slip C3. Top rating: the tray that won't slip.
Shipping from Spain across Europe. Made to measure and delivered to your door.

Description

It pays off where a rectangular tray will not go: in a narrow bathroom, the curve gives back the space the tray was taking from the door.

The semicircular shower tray is the Quarzo model with its front curved at a 50 radius, made for corner showers with a two-panel sliding enclosure. It comes in three sizes — 70×70, 80×80 and 90×90 cm — in the ten colours of the chart, with the same mineral-filled resin, the same trap and the same C3 anti-slip rating as the Smooth and the Slate.

When a curve pays off

In a narrow bathroom, a rectangular tray in the corner forces an enclosure that swings inwards and eats the walkway. The 50 radius curve trims that corner and gives back the space right where you step in.

It is the same Quarzo tray behind our Smooth and Slate finishes — same resin, same waste, same colours — only the front changes shape.

The enclosure it takes

It is made for two-panel sliding corner enclosures, which are the ones that follow the curve. Before ordering, check the radius yours accepts: ours is R-50, the most common.

Waste and finish

The waste sits in the centre of the tray, with the fall running towards it, and it uses the same round valve as the Smooth and the Slate: 60 l/min at 15 mm water depth with a square stainless steel grate. 27 to 30 mm thick and class 3 (C3) anti-slip.

The waste and trap, part by part

The trap comes with the tray and is the same on every size. It fits the hole moulded at the factory and exits sideways with a G 1½" thread, the standard plumbing size, so your fitter connects it without odd adaptors.

Dimensioned exploded view of the shower tray waste and trap — View the full-size drawing

Dimensions

Outlet: side exit, G 1½" thread
Outer diameter: 150.8 mm
Body diameter: 106.8 mm
Overall height: 58.86 mm
Clearance under the tray: 60 mm or more (recommended)
Flow rate: 60 l/min at 15 mm water depth
Materials: polypropylene · NBR seals · AISI 304 stainless ring and screws

Parts in the assembly

NBR O-ring (Ø 65 × 2.6 mm)
Compression ring (PP)
Waste basket, Spanish version (PP)
Round main body (PP)
Basket (PP)
Seal (NBR)
Nut (PP)
Seal (NBR)
Fixing ring (AISI 304 stainless steel)
Three M5 × 35 countersunk screws (AISI 304 stainless steel)
Connection seal (silicone)

The assembly is 58.86 mm tall, so allow 60 mm or more of clear space under the tray to fit it comfortably. That is the measurement to check before you buy, especially for a floor-level installation.

Where the waste sits

It is drilled at the factory and cannot be moved: the fall is already formed towards it, across four panels. On rectangular sizes it is centred across the width and 37.5 cm from one end; on square sizes it sits in the centre of the tray. If your floor outlet does not line up, it is solved during installation with a length of pipe at its own fall.

Dimensioned plan showing the waste position on rectangular, square and semicircular trays

FAQ

Can I order a size that's not listed?

Yes. We make to measure: message us on WhatsApp with your width and length for a quote.

Can the tray be cut?

Yes, the resin can be cut to fit your bathroom to the millimetre.

Does it include a trap?

Yes, every tray includes the trap and grate for free.

Is it slippery?

No. The whole range has the top non-slip rating (class C3).

How much does it cost?

Pick the size on this page and you will see the price with VAT included. All three follow the same per-square-metre tariff as the rest of the range, with the trap included. Shipping is worked out in the basket from your postcode.

What sizes are available?

Widths of 70, 80 and 90 cm, with a 50 radius curve. It is a corner shape, so the width and the depth match.

Can it be cut?

No. The curve is moulded at the factory; cutting it would ruin the radius and the edge. If you need to adjust centimetres, the way is a trimmed rectangular tray.

Does it use the same valve as the others?

Yes, the round 60 l/min one with a stainless steel grate, just like the Smooth and the Slate. It is the same Quarzo tray with a different front.