Ribera shower tray

Straight lines and a three-sided outer frame, with a single fall towards the waste, which sits at the bottom of the fall. Slate texture, the same as the finish of that name.

Three-sided frameC3 non-slipCover plate

€127.95VAT included

From €127.95

Colour: White

Width (cm) Length (cm)

We are the manufacturer. No middlemen. Custom cuts and sizes.
Free trap & grate. Included with every tray, at no extra cost.
Non-slip C3. Top rating: the tray that won't slip.
Shipping from Spain across Europe. Made to measure and delivered to your door.

Description

What sets the Ribera apart is the cover plate that hides the waste across the width of the tray: order it in resin, in any colour from the chart, or in stainless steel.

The Ribera shower tray is the three-sided frame model of the range: the waste sits at the bottom of the fall, at one end, hidden under a cover plate that spans the full width, so the surface stays clear. It is made in slate texture, from 70×90 to 90×200 cm, in the ten colours of the chart.

Which bathroom it suits

The Ribera is the straight-lined tray of the range. Its three-sided outer frame gives a clean finish against the wall and hides the waste inside the frame itself, so the surface stays clear: no grate in the middle and no cross fall.

It works well where the tray sits against three walls and you want it to disappear. If your space is open on more sides, look at the Smooth or the Slate, which are drilled in the centre.

The cover plate, which is its trademark

A rectangular plate of 60, 70 or 80 cm de largo y 10 de ancho sits over the waste, depending on the tray width. Order it in resin, in any colour from the chart — so it vanishes against the tray — or in stainless steel if you would rather see it.

The stainless version is made to order at the factory too, so it is worth saying so when you ask for a quote.

Material and safety

The same polyester resin with dolomite mineral filler as the rest: 27 to 30 mm thick, 46 kg/m², colour running through the whole body and class 3 (C3) anti-slip, the top rating, to DIN 51097. The texture is slate, the same as our finish of that name.

The trap it uses

The Ribera has a rectangular waste, not the round one of the Smooth and the Slate. It hides in the frame at one end, at the bottom of the fall, and is covered by the plate spanning the width of the tray. It comes with the tray. The factory has not sent us the exploded drawing of this valve yet, so we do not publish one: the drawing on the Elite page belongs to a different valve.

Waste specifications

Type: rectangular, in the frame
Flow rate: 60 l/min at 15 mm water depth
Cover: 60, 70 or 80 cm long by 10 wide, depending on the tray width, in resin or stainless steel
Standard: waste compliant with CE-UNE EN 274

The waste is hidden in the frame, so it does not need the clearance under the tray that the round one asks for: it installs the same way on top of the floor or flush.

Where the waste sits

It sits at the bottom of the fall, in the frame at one end and centred across the width, with a single 2% slope. The cover plate spans the width of the tray; the outer frame is 5 cm and the outlet is 20 cm from the end. It cannot be moved: the fall is formed at the factory.

Dimensioned plan showing the waste position on the Ribera tray

FAQ

Can I order a size that's not listed?

Yes. We make to measure: message us on WhatsApp with your width and length for a quote.

Can the tray be cut?

Yes, the resin can be cut to fit your bathroom to the millimetre.

Does it include a trap?

Yes, every tray includes the trap and grate for free.

Is it slippery?

No. The whole range has the top non-slip rating (class C3).

How much does it cost?

Pick the size on this page and you will see the price with VAT included. It follows the same per-square-metre tariff as the rest of the range, with the trap and the cover plate included. Shipping is worked out in the basket from your postcode.

Can I choose where the waste goes?

No. It sits at the bottom of the fall, in the frame at one end and centred across the width, with a single 2% slope. It is formed at the factory and cannot be moved.

Can it be cut to size?

Yes, lengthwise and up to 10 cm, on the side opposite the waste. The width is not cut: it has to be 70, 80 or 90 cm.

Which colours is it made in?

The ten from the factory's RAL chart, the same as the rest of the range. The colour runs through the whole body.

How does it differ from the Elite?

Both hide the waste in a frame, but the Elite covers it with a 31 × 6.5 cm linear steel grate and the Ribera with a plate spanning the full width of the tray. The Elite also has a price on the site.